Figure Cases

Feldherr raster foam model trays. The perforated, pre-punched raster (14 mm * 14 mm) permits the individual adaptation of the foam material inserts to your figures. Just cut out sections to fit the foam to your models; these trays are perfect for odd shaped models.

These handy trays are compatible with Felderrs Mini, Mini Plus and Backpack figure cases.

Each tray is supplied in two parts; pre-punched tray and base/divider. The tray is self-adhesive so just adjust the tray as needed then peel off the backing and stick it to the base.

• Size mm: 275 mm x 175 mm x 25 mm
• Size inches: 11" x 7" x 1"
• High-quality, fine pored foam material
• Foam material inserts can be perfectly individually adapted
• Self-adhesive for simple assembly

Feldherr raster foam model trays. The perforated, pre-punched raster (14 mm * 14 mm) permits the individual adaptation of the foam material inserts to your figures. Just cut out sections to fit the foam to your models; these trays are perfect for odd shaped models, particlarly larger models and cavalry.

These handy trays are compatible with Felderrs Mini, Mini Plus and Backpack figure cases.

Each tray is supplied in two parts; pre-punched tray and base/divider. The tray is self-adhesive so just adjust the tray as needed then peel off the backing and stick it to the base.

• Size mm: 275 mm x 175 mm x 60 mm
• Size inches: 11" x 7" x 2.5"
• High-quality, fine pored foam material
• Foam material inserts can be perfectly individually adapted
• Self-adhesive for simple assembly

Feldherr foam model trays. Each standard 16 count foam tray, stores up to 16 miniatures - whether Games Workshop, Flames of War, Confrontation or any other 25 mm scale games system.

These handy trays are compatible with Felderrs Mini, Mini Plus and Backpack figure cases.

Each tray is supplied in two parts; compartmented tray and base/divider. The tray is self-adhesive so just adjust the tray as needed then peel off the backing and stick it to the base.

• Size mm: 275 mm x 175 mm x 25 mm
• Size inches: 11" x 7" x 1"
• 16 compartments size (mm) 25 mm x 50 mm x 25 mm
• 16 compartments size (inch) 1" x 2" x 1"
• High-quality, fine pored foam material
• Self-adhesive for simple assembly

A sheet of foam to separate figure case foam trays. The separation foam can be stuck to foam trays to form a base or kept separate to be used as a divider or as a protective layer on top of the top tray in your case.

There are two ways of sticking these separators to foam trays to form a base. Feldherr self-adhesive trays will adhere simply by pulling away the backing paper, you can also use many types of glue

Feldherr raster foam model trays. The perforated, pre-punched raster (14 mm * 14 mm) permits the individual adaptation of the foam material inserts to your figures. Just cut out sections to fit the foam to your models; these trays are perfect for odd shaped models.

These handy trays are compatible with both Games Workshop and Feldherr figure cases.

Each tray is supplied in two parts; pre-punched tray and base/divider.

Feldherr raster foam model trays. The perforated, pre-punched raster (14 mm * 14 mm) permits the individual adaptation of the foam material inserts to your figures. Just cut out sections to fit the foam to your models; these trays are perfect for odd shaped models.

These handy trays are compatible with both Games Workshop and Feldherr figure cases.

Each tray is supplied in two parts; pre-punched tray and base/divider.

Feldherr raster foam model trays. The perforated, pre-punched raster (14 mm * 14 mm) permits the individual adaptation of the foam material inserts to your figures. Just cut out sections to fit the foam to your models; these trays are perfect for odd shaped models.

These handy trays are compatible with both Games Workshop and Feldherr figure cases.

Each tray is supplied in two parts; pre-punched tray and base/divider. The tray is self-adhesive so just adjust the tray as needed then peel off the backing and stick it to the base.

• Size mm: 345 mm x 275 mm x 30 mm
• High-quality, fine pored foam material
• Foam material inserts can be perfectly individually adapted
• Self-adhesive for simple assembly

Feldherr raster foam model trays. The perforated, pre-punched raster (14 mm * 14 mm) permits the individual adaptation of the foam material inserts to your figures. Just cut out sections to fit the foam to your models; these trays are perfect for odd shaped models.

These handy trays are compatible with both Games Workshop and Feldherr figure cases.

Each tray is supplied in two parts; pre-punched tray and base/divider. The tray is self-adhesive so just adjust the tray as needed then peel off the backing and stick it to the base.

• Size mm: 345 mm x 275 mm x 60 mm
• Size inches: 13.6" x 10.8" x 2.4"
• High-quality, fine pored foam material
• Foam material inserts can be perfectly individually adapted
• Self-adhesive for simple assembly

Feldherr raster foam model trays. The perforated, pre-punched raster (14 mm * 14 mm) permits the individual adaptation of the foam material inserts to your figures. Just cut out sections to fit the foam to your models; these trays are perfect for odd shaped models.

These handy trays are compatible with both Games Workshop and Feldherr figure cases.

Each tray is supplied in two parts; pre-punched tray and base/divider.

Feldherr raster foam model trays. The perforated, pre-punched raster (14 mm * 14 mm) permits the individual adaptation of the foam material inserts to your figures. Just cut out sections to fit the foam to your models; these trays are perfect for odd shaped models.

These handy trays are compatible with both Games Workshop and Feldherr figure cases.

Each tray is supplied in two parts; pre-punched tray and base/divider.

NOTE: Unlike the self-adhesive trays from Feldherr these either need to be stuck to their base/divider manually or can be left unattached as required.

TIP: At Mythreal we find PVA to work perfectly, what is more it, is also easy to get hold of very cheaply at most hardware shops; be aware it does need about an hour to dry.

• Size mm: 345 mm x 275 mm x 30 mm
• High-quality, fine pored foam material
• Foam material inserts can be perfectly individually adapted
• Simple gluing by all-purpose glues or self adhesive foil